Maintenance ★ gearbox used in the process to check the contents, maintenance issues and time to see a list of instructions. ★ deadline listed in the table depends on the gearbox working conditions, reference conditions: Daily working hours: 24 hours per load: 100% input speed: 1500 rpm Oil temperature maximum value: 90 ℃ mineral oil imports reducer sales, synthetic cooling coil 100 ℃ ★ cooling coil installed inside the gearbox. In the cooling coil is cooled inside through water. Into the gearbox cooling water temperature should be ≤ 20 ℃ Shandong reducer sales to a maximum of 30 ℃. Soften hard water to go through before they can be used. When the cooling water through the cooling coil when the heat will be transferred to the cooling water from the cooling coil, so that the heat is discharged from the system. ★ Note! ①, cooling water may be in any direction through the gear box. ②, cooling water pressure should not exceed 0.8MPa, generally 0.3 ~ 0.4MPa can. ③, the cooling water flow of about 8L / min. ④, if the gearbox stopped working and stopped a long time, or there is danger of freezing, we will certainly want to cooling coil in the cooling water discharge clean. The best water to use compressed air to dry. ⑤, the end of the cooling coil must not distort the gear sales, otherwise it will damage the cooling coil. ⑥, necking must not overtighten the screws, not dismantled, or will cause damage to the cooling coil. ⑦, in order to avoid too high water pressure, the cooling water supply system must be equipped with a flow control device, such as valve or shut-off valve, to control the maximum pressure value. ⑧, initially through the water to the circulating water system, all shut-off valves are fully open. Especially shutoff valve gear box at the outlet of the cooling coil to ensure that normally open, except when maintenance needs and the system when disconnected. Shandong reducer sales, Jinan Springfield (certified), Tibet reducer sales provided by Jinan Electrical Equipment Co., Springfield. Mechanical and Electrical Equipment Co., Ltd. Jinan Springfield (www.jnspray.cn) Shandong Jinan, industrial maintenance, installation of leaders over the years, the company implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. Jinan Springfield leadership with the staff warmly welcome all inquiries negotiations to create a better future for Jinan Springfield.